19
19
Scope of delivery
1 x baking sheet
1 x grill rack
Installation material
Technical Data
Model
eHBC 546 IX
Energy efficiency class 1)
A
Energy consumption 2)
0.99 kWh
Oven capacity
70 liters
Airborne noise emission
58 dB(A) re 1 pW
Design
Built-in unit
Product dimensions H x W x D / weights
Oven
59.5 x 59.5 x 57.2 cm
Oven interior
33.0 x 47.0 x 43.0 cm
Hob
5.5 x 59.0 x 52.0 cm
Built-in dimensions / cutouts H x W x D
Oven
60.0 x 60.0 x 57.5 cm
Hob
56.0 x 49.0 cm
Net weight
Oven 30.0 kg – hob 8.5 kg
electric connection
Total power input
9000 W
Power input oven
3000 W
Power input hob
6000 W
Mains voltage / frequency
220-240 V~, 50/60 Hz / 380-415 V~, 50/60 Hz
Fuse
3 x 16 A
Protection class / degree
I / IP20
1) A+++ (highest efficiency) till G (lowest efficiency).
2) Conventional heating. Values measured based on standards EN 50304, EN 60704.
The right to make technical and design modifications in the course of continuous product development remains reserved.
All device-specific data of the energy label have been determined by the manufacturer under laboratory conditions in accordance with pan-European
standardized measuring methods. These are regulated by
ISO eN 50304
. The actual energy consumption depends on the usage and might therefore
also be above the values determined by the manufacturer under standard conditions. An expert knows these relations and will execute the tests with
special measurement instruments in accordance with the regulations in place.
This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has
been constructed in accordance with the latest safety regulations.
Installation
CAUTION:
• The installation of the device must allow for sufficient heat dissipation. Air inlets and outlets must not be blocked.
• Worktop, back panels, veneers, plastic coatings, and adhesive used must all have sufficient heat-resistance (up to 100°C).
• Hob and oven must be from the same manufacturer and have the same type designation.
• The device conforms to heat insulation class Y, i.e. only one side of the device may be installed near higher kitchen furniture or walls.
• Do not install the device directly next to refrigerators or freezers. The escaping heat would result in an unnecessary increase of energy consump
-
tion of those appliances.
• Make sure to align the centers of the oven and the hob.