Removing the oven door
Removing the oven door
Removing the oven door
Removing the oven door
You may remove the oven door to facilitate cleaning
and to get better access to the oven interior.
•
Open the appliance door completely.
•
Push the retaining brackets (a) of
the hinges on both sides up-
wards.
•
Slightly close the door and lift it up to remove it.
•
When reinstalling the door, make sure the notch
of the hinge is properly aligned with the protrusion
of the hinge holder.
•
Then press down th
Then press down th
Then press down th
Then press down the retaining brackets (a) again,
e retaining brackets (a) again,
e retaining brackets (a) again,
e retaining brackets (a) again,
otherwise the hinges could get damaged
closing the oven door.
Cleaning the oven
Cleaning the oven
Cleaning the oven
Cleaning the oven
NOTE
NOTE
NOTE
NOTE::::
By cleaning after each use, you avoid that food r
siduals and soiling will be burning-in at
eration. Then the cleaning is only possible
of effort.
•
Clean the appliance and accessories depending
on the soiling degree and depending on the su
face only with a soft, damp cloth and commercia
ly, food safe cleaners.
•
Soak heavily soiled areas with some warm
water or a vinegar cleaner.
•
Wipe off grease residues from the sealing framed
the cooking chamber.
•
Use a soft absorbent cloth for drying after
ing.
Cleaning the glass panel
Cleaning the glass panel
Cleaning the glass panel
Cleaning the glass panel
If necessary, clean the inside of the glass panel.
•
Open the appliance door.
•
Press the release tabs at the side of the retaining
strip in order to remove it.
11
You may remove the oven door to facilitate cleaning
and to get better access to the oven interior.
Open the appliance door completely.
retaining brackets (a) of
Slightly close the door and lift it up to remove it.
When reinstalling the door, make sure the notch
of the hinge is properly aligned with the protrusion
e retaining brackets (a) again,
e retaining brackets (a) again,
e retaining brackets (a) again,
e retaining brackets (a) again,
otherwise the hinges could get damaged when
you avoid that food re-
in at the next op-
possible with a lot
and accessories depending
degree and depending on the sur-
ft, damp cloth and commercial-
Soak heavily soiled areas with some warm soapy
Wipe off grease residues from the sealing framed
Use a soft absorbent cloth for drying after clean-
If necessary, clean the inside of the glass panel.
Press the release tabs at the side of the retaining
•
Take off the glass carefully forward.
•
Replace the glass panel and the retaining strip
properly; after you’ve cleaned the glass and dried
it thoroughly.
Reverse the bulb
Reverse the bulb
Reverse the bulb
Reverse the bulb
WARNING:
WARNING:
WARNING:
WARNING:
•
Make sure that the appliance is turned off from
the power supply (fuse).
•
Allow the lamp to cool down before replacing the
bulb. There is risk of burns!
There is risk of burns!
There is risk of burns!
There is risk of burns!
NOTE
NOTE
NOTE
NOTE::::
Use the correct bulb, heat resistant up to 300°C:
1 x 15 W, 230 V
1 x 15 W, 230 V
1 x 15 W, 230 V
1 x 15 W, 230 V~~~~
•
Unscrew the lamp cover anti
it with a dry cloth.
•
Change the bulb.
•
Reattach the lamp cover and screw it tight in a
clockwise direction.
•
Check the functionality.
Trou
Trou
Trou
Troubleshooting
bleshooting
bleshooting
bleshooting
Before you contact an
Before you contact an
Before you contact an
Before you contact an authorized specialist
authorized specialist
authorized specialist
authorized specialist
Problem
Problem
Problem
Problem
Possible causes
Possible causes
Possible causes
Possible causes
Appliance
does not
work
The power supply
is disconnected.
Oven lamp
does not
work
Bulb is defective,
has been inserted
incorrectly or not
firmly.
Strong for-
mation of
smoke
Grease residue in
the oven.
Take off the glass carefully forward.
Replace the glass panel and the retaining strip
properly; after you’ve cleaned the glass and dried
Make sure that the appliance is turned off from
Allow the lamp to cool down before replacing the
There is risk of burns!
There is risk of burns!
There is risk of burns!
There is risk of burns!
Use the correct bulb, heat resistant up to 300°C:
Unscrew the lamp cover anti-clockwise and clean
Reattach the lamp cover and screw it tight in a
bleshooting
bleshooting
bleshooting
bleshooting
authorized specialist
authorized specialist
authorized specialist
authorized specialist
Possible causes
Possible causes
Possible causes
Possible causes
What to do
What to do
What to do
What to do
The power supply
disconnected.
Check the fuse
of your domestic
wiring system.
ulb is defective,
has been inserted
incorrectly or not
Check the bulb,
see “Reverse
the bulb”.
Grease residue in
Switch off the
oven and allow
to cool down
before cleaning.
