BOMANN EBO 9612.1 IX, Instruction Manual

Page: 8 / 16

8
After connecting to the power supply, the display
shows [00•00] and the dot symbol (3)
(3) (3)
(3) flashes:
- first select the beep volume
- and then set the time of day to put the appliance
into operation.
Set the beep volume
Set the beep volume Set the beep volume
Set the beep volume
You have the option of selecting 3 loudness levels.
•
While the point symbol (3)
(3) (3)
(3) is flashing, you can
select the volume level using the (K6) (K6) (K6) (K6) button.
Setting the time Setting the time Setting the time Setting the time
Set the current time of day:
•
Press the button (K4) (K4) (K4) (K4) for setting the time of day.
The manual operation symbol (2) (2) (2) (2) is lighting.
•
As long as the point (3)
(3) (3)
(3) between hour and minute
is flashing, you can make the adjustment with the
buttons (K5) / (K6)
(K5) / (K6) (K5) / (K6) (K5) / (K6).
Timer functions Timer functions Timer functions Timer functions
GENERAL NOTES to the timer functions
GENERAL NOTES to the timer functions GENERAL NOTES to the timer functions
GENERAL NOTES to the timer functions
•
Only the reminder function is available for the
oven function [Defrost].
•
As long as the point (3) (3) (3) (3) flashes between hour and
minute, you can adjust the setting.
•
A few seconds after the last button press, the
setting is saved. The display shows the time of
day.
•
The AUTO indication shows the activation of a
timer function that stops the oven operation after
the preset time.
•
Press the corresponding function button to display
the remaining time of the respective operating
function.
•
The running times can be reduced or increased at
any time.
•
The setting of a function that stops the oven op-
eration is canceled by pressing the manual opera-
tion button.
Using Using Using Using the timer as reminder function the timer as reminder function the timer as reminder function the timer as reminder function
Alarm function without oven operation. The selector
switches remains in the off position.
Oven operation doesn’t stop automatically!
Use the function e.g. as a reminder to add spices to
the food or to pour water on after a certain time.
•
Press the button ((((KKKK1) 1) 1) 1) for the alarm, the symbol
(4) (4) (4) (4) lights up and the display shows [00•00].
•
Set the alarm time up to 24 hours using the but-
tons ((((KKKK5)
5) 5)
5) / / / / ((((KKKK6)
6) 6)
6).
•
The symbol (4)
(4) (4)
(4) indicates that the alarm time is
activated.
Reset the alarm time to 00•00 to cancel the setting.
Using the timer to stop the operation after Using the timer to stop the operation after Using the timer to stop the operation after Using the timer to stop the operation after XX XX XX XX
••••
XX XX XX XX
hours hours hours hours
•
Press the button ((((KKKK2) 2) 2) 2) for the cooking time, the
symbols (1)
(1) (1)
(1) and (2)
(2) (2)
(2) lights up and the display
shows [00•00].
•
Set the cooking time up to 10 hours using the
buttons ((((KKKK5)
5) 5) 5) //// ((((KKKK6) 6) 6) 6).
•
Select the required heating function and tempera-
ture to start the operation.
Using the timer to stop the operation at Using the timer to stop the operation at Using the timer to stop the operation at Using the timer to stop the operation at XX XX XX XX
••••
XX XX XX XX
o’clock o’clock o’clock o’clock
•
Press the button ((((KKKK3) 3) 3) 3) for the cooking stop, the
symbols (1) (1) (1) (1) and (2) (2) (2) (2) lights up and the display
shows [00•00].
•
Set the time of day at which the operation must
be stopped using the buttons ((((KKKK5)
5) 5) 5) / / / / ((((KKKK6) 6) 6) 6).
•
Select the required heating function and tempera-
ture to start the operation.
Using the timer to delay the cooking time and to Using the timer to delay the cooking time and to Using the timer to delay the cooking time and to Using the timer to delay the cooking time and to
switch off the operation at
switch off the operation at switch off the operation at switch off the operation at XX XX XX XX
••••
XX XX XX XX o’clock o’clock o’clock o’clock
•
First set the cooking time as described under
"
Using the timer to stop the operation after XX:XX
hours
".