BOMANN EBO 9612.1 IX, Instruction Manual

Page: 7 / 16

7
•
If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
Startup / O Startup / O Startup / O Startup / Operation peration peration peration
Before initial use
Before initial use Before initial use
Before initial use
•
Clean the oven interior with all therein located
accessories. Follow the instructions that we give
you in the chapter "Cleaning and Maintenance".
•
In order to burn any manufacturing residue, heat
the closed oven for approx. 30 minutes at 250°C.
Use the heating function [Upper/lower heating].
Then switch to the heating function [Grill] for an-
other 20 minutes.
NOTE NOTE NOTE NOTE: : : :
The occurring odor and possibly a slight smoke
development cannot be avoided. Therefore en-
sure for a good ventilation of the room during
heating.
Operation
Operation Operation
Operation
1111 Oven function selector switch Oven function selector switch Oven function selector switch Oven function selector switch
The function selector switch is used to set the type of
heating. Rotate the function selector switch until the
icon for the desired type of heating points upwards.
2 2 2 2 Power control lamp Power control lamp Power control lamp Power control lamp
The control lamp indicates the oven operation.
3333 Oven temperature selector switch Oven temperature selector switch Oven temperature selector switch Oven temperature selector switch
The temperature selector switch is used to adjust the
oven temperature. The thermostat allows the tem-
perature setting from 50°C to 250°C.
CAUTION:
CAUTION: CAUTION:
CAUTION:
Turn the temperature selector switch only counter-
clockwise and back again. Otherwise the switch will
be damaged.
4444 Oven temperature control lamp Oven temperature control lamp Oven temperature control lamp Oven temperature control lamp
The temperature control lamp indicates the heating
operation. If the lamp goes off, the set oven tempera-
ture is reached.
During operation, the oven must continuously reheat
to keep the temperature stable. When reheating the
control lamp is lighting (thermostat function).
NOTE
NOTE NOTE
NOTE::::
If the recipe recommends putting the food in the pre-
heated oven only, this should not be done before the
control lamp turns off for the first time.
5 Digital timer with LED Display 5 Digital timer with LED Display 5 Digital timer with LED Display 5 Digital timer with LED Display
Display
Display Display
Display
1111 AUTO function symbol
2222 Manual operation
3333 Point symbol 4444 Symbol minute minder
5555 Time of day and Timer
settings
Function buttons Function buttons Function buttons Function buttons
K1 K1 K1 K1 Alarm
K2
K2 K2 K2 Cooking time
K3
K3 K3 K3 Cooking stop
K4
K4 K4
K4 Time of day
K5 K5 K5 K5 Reduce the time
K6
K6 K6 K6 Increase the time / beep
volume setting
The time and the various functions of the timer are
set via the display. Use the buttons (K5
(K5 (K5 (K5)))) / (K6) / (K6) / (K6) / (K6) to
make the settings: