46
Remove the grease filter(s).
Depending on model
(a) or (b):
Open the black protective box of the
plug-in device and release the plug connection.
Carefully push the lamp out of the holder through
the housing.
Replace defect LED module and connect the two
ends of the plug-in device.
Insert new lamp properly in the bulb holder.
Close the protective box with inserted plug-in
device. Replace the grease filter(s).
Troubleshooting
Before you contact an authorized specialist
Problem
Possible Cause / Solution
Unit is not
working or
not properly
-
Check the power supply.
-
Check the power level.
Unit is not
working
efficiently
-
Check the power level.
-
Is the kitchen properly ventilat-
ed?
-
Clean the grease filter(s).
-
At recirculation mode, check the
carbon filter.
-
Check the air outlet.
Light is not
working
-
Check the bulb, see
“Replacing
the bulb”.
Oil is drip-
ping
-
Clean the grease filter(s).
NOTE:
If you are still having problems after following steps
above, contact your trader or an authorized techni-
cian.
Technical Data
Electrical connection…………………………...………..
Connection voltage: ………….…..220-240 V~ / 50 Hz
Connection power: …………...……………..........67 W
Lighting, LED: ……………………..……....…1 x 2.0 W
Protection class: ……………………………………..…I
Weight / Dimension in mm....……...……….…………..
Net weight: …………………….........….approx. 7.0 kg
Available accessory…………………………..…………
Activated carbon filter for recirculation mode: ………..
KF 563 (Art.-No. 256 300)
not supplied
The right to make technical and design modifications
during continuous product development remains
reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
