BOMANN DU 654 G, Instruction Manual

Page: 21 / 28

•
Pull the inner duct up and fasten the duct cover on the side to the previously mounted rail by
the screws 2 x ST10*10 mm including washers
IIIInstalling the activated carbo
nstalling the activated carbo nstalling the activated carbo
nstalling the activated carbon filter for recirculation mode
n filter for recirculation mode n filter for recirculation mode
n filter for recirculation mode
•
Remove the aluminum grease filter.
•
Place the carbon filter onto the air intake of the extraction duct. Make sure that the mounting pins on the
extraction duct engage the mounting slots of the carbon filter. Turn the respective filter clockwise until it
clicks into place.
•
Reinstall the aluminum grease filter.
NOTE
NOTE NOTE
NOTE::::
The activated carbon filter absorbs odours
Electrical connection
Electrical connection Electrical connection
Electrical connection
WARNING:
WARNING: WARNING:
WARNING:
•
The installation to the mains supply must conform to the local standards and
•
Improper connection may cause to an
•
Do not modify the appliance plug
an authorized specialist.
•
The accessibility of the power plug must be ensured in order to disconnect the
supply in case of an emergency.
•
Ensure that your mains power corresponds with the specifications of the appliance. The specifications are
printed on the rating label.
•
Connect the mains cable to a properly installed and earthed wall outlet.
The extractor hood is operated via pushbuttons.
0 Fan off
1 Lowest fan setting
2 Moderate fan setting
3 Highest fan setting
Lighting on or off
21
duct up and fasten the duct cover on the side to the previously mounted rail by
including washers.
n filter for recirculation mode
n filter for recirculation mode n filter for recirculation mode
n filter for recirculation mode
um grease filter.
Place the carbon filter onto the air intake of the extraction duct. Make sure that the mounting pins on the
extraction duct engage the mounting slots of the carbon filter. Turn the respective filter clockwise until it
um grease filter.
odours and must be replaced at least every six months
The installation to the mains supply must conform to the local standards and regulations.
Improper connection may cause to an electric shoc
electric shoc electric shoc
electric shock!
k! k!
k!
plug. If the plug does not fit properly to the outlet, let install a proper outlet by
The accessibility of the power plug must be ensured in order to disconnect the appliance
Ensure that your mains power corresponds with the specifications of the appliance. The specifications are
Connect the mains cable to a properly installed and earthed wall outlet.
Startup / Operation Startup / Operation Startup / Operation Startup / Operation
extractor hood is operated via pushbuttons.
duct up and fasten the duct cover on the side to the previously mounted rail by screwing in
Place the carbon filter onto the air intake of the extraction duct. Make sure that the mounting pins on the
extraction duct engage the mounting slots of the carbon filter. Turn the respective filter clockwise until it
months regardless of use.
regulations.
. If the plug does not fit properly to the outlet, let install a proper outlet by
appliance from the power
Ensure that your mains power corresponds with the specifications of the appliance. The specifications are