BOMANN 772430, Instruction Manual

Page: 20 / 28

20
Electrical connection
WARNING:

The installation to the mains supply must conform
to the local standards and regulations.

Improper connection may cause to an electric
shock!

Do not modify the appliance plug. If the plug does
not fit properly to the outlet, let install a proper
outlet by an authorized specialist.

The accessibility of the power plug must be en-
sured to disconnect the appliance from the power
supply in case of emergency.

Make sure that the voltage supply matches the
specifications on the rating label before connect-
ing.

Connect the mains cable to a properly installed
and earthed wall outlet.

If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
Reversing the door opening
If required, the door opening can be moved from the
right (supplied condition) to the left side.
WARNING:
When replacing the door stop, the appliance must be
disconnected from the power supply first.
NOTE:

Ask another person to assist.

You possibly need: screw wrench, Phillips screw-
driver as well as a thin-blade screwdriver.

Loosen the screws on the top cover.

Lift the top cover approx. 5 cm away from the
device, then carefully pull out the terminal strip (1)
for the display (2) and disconnect it. Remove the
top cover.

Dismount the upper door hinge; lift out the appli-
ance door and set it safely aside.

Tilt the appliance slightly backwards and block it
in this position. Unscrew the feet and dismount
the lower door hinge.