37
Unscrew the inlet hose from the water valve.
Wash the inlet filter under running water. Recon-
nect the inlet hose firmly.
Inlet filter at the appliance
Clean the filter regularly, approximately every one to
three months.
Unscrew the inlet hose from the appliance back.
Clean the filter with a small brush.
Reconnect the inlet hose firmly.
Cleaning the filter of drain pump
CAUTION:
The appliance must never be used without the filter.
The foreign object trap in the drain pump prevents
rinsed-out parts from blocking the drain pump sys-
tem. Clean the pump regularly, approx. once a
month; depending on use.
Open the maintenance cover in the base of the
unit. Caution! For this, the use of a tool could be
necessary.
Place a drip tray under to catch possible leaking
water.
Turn the cap counterclockwise. Look for leaking
water! Turn the filter not completely out!
Interrupt the water flow by turning the filter clock-
wise again.
If the draining process is completed, turn out the
filter completely.
Take off the filter and remove any dirt and foreign
objects.
Insert the cap again and make sure it is tightened
well and no water can escape.
Close the maintenance cover.
Freezing protection
If the appliance is out of operation and exposed to
temperatures below zero, observe the following
measures:
Disconnect the unit from the power supply.
Close the water supply and remove the inlet hose
from the water valve.
Drain the water from the supply hose and from the
water valve.
Reconnect the supply hose to the water valve.
Troubleshooting
Before you contact an authorized specialist
For some malfunctions, the display shows error
codes to warn you:
CODE / Trouble
Possible cause / measure
Appliance does
not work or start
Check the power supply / water
supply. Is the door closed, the
device switched on or a program
selected?
Strong
Vibration
Have the transport bolts been
removed? The device must
stand on a firm surface. Are the
feet aligned?