Bomag BW 177 D-4, Operating Instructions Manual

Page: 64 / 151

Operation
BOMAG 64 BW 177 D-4
Fig. 99
l
When the end of the track, mark 2, is reached,
press the button F6 “STOP” (Fig. 99).
l
Stop the machine.
Note
i
The first forward pass is finished.
Control field F5 lights green. This means, that the
compaction is not yet completed. One or several
passes are still required.
5.17 Finishing compaction of a
track
Fig. 100
l
Drive forward and reverse passes on a track
until the green control field to the left of F5 (Fig.
100) goes out and the red control field F6 be-
low lights up after pressing the stop button F6.
The compaction process on this track is finished.
Criterion for a finished track:
Compared with the previous track the increase of
the E
VIB
-value in the same travel direction was
less than 10%. This criterion is also fulfiled if the
E
VIB
decreases.
Note
i
Another pass on this track does not make any
sense, because an increase in load bearing ca-
pacity is hardly possible with this machine.
l
If necessary print out the measuring data for
this track (see following section).