Bomag BW 100 AD-5, Operating & Maintenance Instructions

Page: 128 / 212

7.4 Loading by crane
Loads must only be attached and hoisted by an
expert / capable person.
Do not use damaged or in any other way
impaired lashing points.
Use only lifting gear and lifting tackle with suffi-
cient load bearing capacity for the weight to be
loaded. Minimum load bearing capacity of
lifting gear: see max. operating weight
Ä
Chapter 2 „Technical data“ on page 13 .
Always use appropriate lifting and lashing
means on the lifting and lashing points.
Use lifting and lashing gear only in the pre-
scribed direction of load application.
Lifting tackle must not be damaged by machine
components.
When lifting the machine avoid uncontrolled
movements of the load. If necessary hold the
load with guide ropes.
1. Shut down the engine.
2.
WARNING!
Danger of crushing by the
articulating machine!
– Do not step into the articula-
tion area of the machine
while the engine is running.
Attach and secure the articulation lock.
The foldable ROPS can be folded
down to reduce the transport height.
3. Fold down the foldable ROPS, if necessary
Ä
Chapter 7.2.1 „Folding down the foldable
ROPS“ on page 126 .
Fig. 109
Loading / transporting the machine – Loading by crane
BW 100 AD-5 128