Boly Trail Cameras – MG984G Series
User Manual /
www.bolymedia.com
5
2.4 Camera Modes
The different modes are accessed by sliding the power
switch to the different positions marked on the
camera. The power switch is located inside the camera
on the bottom right of the LCD screen.
The different camera modes are as follows:
OFF Mode
Turns the camera off. The camera will still
consume a small amount of power while in OFF
mode. It is recommended to remove the batteries if
the camera will not be used for a long period of
time.
TEST/SETUP Mode
In this mode, the camera allows you to customize
the camera settings or play back pictures and
videos the camera has taken on the LCD display.
ON Mode [ Hunting Mode ]
Camera will take pictures or video when motion is
detected and/or at specific time intervals,
according to the programmed settings. After
switching the camera to the ON position, the red
LED motion indicator will blink for about 10
seconds and then turn off. This preset time allows
you to adjust the cameras position if needed,
before the camera becomes active.