Boly Trail Cameras – MG984G Series
User Manual /
www.bolymedia.com
25
second delay. Press the
► or
keys to decrease
or increase the video length.
Default: 10 seconds
Clock Settings
Set Clock
Set the cameras date and time. The date format
is month/day/year. The time format is hour:
minute: second. The valid values for the year are
between 2017 and 2050.
Time Lapse
The camera can capture images or videos at a
preset time interval regardless of motion
detection. Changing this setting to a non-zero
value turns on Time Lapse mode and the camera
will take photos at the set interval time – Values
range from 5 minutes to a maximum of 8 hours.
If PIR Trigger/Sensitivity and Time Lapse
options are BOTH OFF, the camera will not
capture any photos or videos.
Default: OFF
PIR Trigger/
Sensitivity
This setting is for the sensitivity of the PIR
sensor. There are four sensitivity parameters:
High, Normal, Low and Off. It is recommended
to use HIGH sensitivity in areas with little
environmental interference and also for warmer,
humid temperatures or climates. Use LOW
sensitivity for areas that have a lot of
interference. The sensitivity of the PIR is effected
by temperature. Higher temperatures leads to
lower sensitivity.
If PIR Trigger/Sensitivity and Time Lapse
options are BOTH OFF, the camera will not
capture any photos or videos.
Default: Normal
PIR Interval
This setting indicates how long the PIR sensor
will be disabled after each camera triggering.
During this time the PIR sensor will not react to
any detected motion or scheduled timer
functions. The PIR Interval can be set between
zero seconds to a maximum of 1 hour. Press