SG550M-8mHD
3 Quick Start Guide
Page 12
worked in ON mode.
3.5
Power on and Enter into the ON Mode
Before switching on, please pay attention to the
following:
1.
Avoid temperature and motion disturbances in
front of the camera such as a big leaf, curtain,
air-conditioner, air outlet of the chimney and
other heat sources to prevent from false
triggering.
2.
The height from the ground for placing the
camera should vary with the object size
appropriately. In general, three to six feet is
preferred.
Slide the power switch to the ON position and
enter into the ON mode. Before entering into the
ON mode, you can adjust the camera towards the
target monitoring area by laser pointer.
After switching on the camera, the motion
indication LED (red) light will blink for about 10s.
The 10s is a buffering time before automatically
capturing photos or videos, e.g. for closing and
locking the bottom cover, fixing the camera on a
tree and walking away.
In ON mode, it is unnecessary to use the
remote control. The camera will take pictures or
videos automatically according to the default
