SG550M-8mHD
3 Quick Start Guide
Page 8
3
Quick Start Guide
3.1
Power Supply
To supply power for the camera, four or eight
AA batteries are needed.
Open the bottom cover. Confirm that the power
switch is in the OFF position and pull out the
battery pack by pulling the silver handle. Load the
fully charged batteries into the pack according to
the polarities signs shown below. Push the battery
pack back into the battery chamber. The following
batteries with 1.5V output can be used:
1.
High-density and high-performance alkaline
batteries (recommended)
2.
Rechargeable alkaline batteries
3.
Rechargeable NiMH batteries
There are four battery slots. Slot 1 and 2 form
one group and is marked “1”while slot 3 and 4 form
the other group and is marked “2”. One “group” of
batteries is needed to supply power for the camera,
but both can be used and is recommended.
When in a low-battery state, the camera will be
automatically shut down after two indication
sounds. Before that it will send a SMS to indicate
the low battery situation. Please change the
batteries at this time.
