BG500 series
4 Advanced Operations
16
Button B: Laser pointer
Setup status Study Code Menu Study Code Menu
Method to add remote control(s) to the camera:
Enter the Setup status, press Menu and enter the Study
Code submenu. Choose “RCH”, press OK button, then press
button A of the remote control. When it's successful, there will
be a "*” before RCH.
Please note that the remote control just can be used in
Indoor Mode. In Outdoor Mode, the remote control will not
function.
4.5
Load or Remove a Wireless Sensor
Any 433MHz wireless sensor, such as infrared body
sensor, wireless door magnet, wireless smoke detector,
etc,can be set as an alarm sensor of the camera.
Method to load or remove a wireless sensor:
1. Power on the wireless sensor.
2. Enter the Setup status, press Menu and enter into the
Study Code submenu. Choose a zone, for example Zone1,
press OK button, then trigger the wireless sensor to check if
the sensor is loaded successfully. When it's successful, there
will be a "*” before the zone number.
