C O N F I G U R A T I O N
4
Dialer Configuration
Adding Numbers
All of the numbers can be stored by sending text message commands to the GSM-1 dialer. The
commands are not case sensitive, so any case can be used when sending commands.
In order to add text numbers, at least one Master number needs to be setup first before adding other
numbers. The command for adding a Master number is
Master<space>number.
Ex: Master 15551234567.
To add a text number to the GSM-1, use the command
Textnum<space>number.
This is
independent from the master number, so it will also need to be added as a separate Text number by
using this command as well to receive the text message alerts.
Ex: Textnum 15551234567.
To remove a number from the dialer, use the command
Remove<space>number.
sent from a
master number that is stored in the dialer.
Ex: Remove 15551234567
To view a list of the numbers stored on the dialer, use the command
List
➢
‘
M
’ beside the number will indicate it is a master number
➢
‘
T
’ beside the number will indicate it is a text number.
Chapter
2
Summary of Contents for EFM-100C
Page 11: ...Notes 7 ...
