background image

 

 

Operating Instructions 

 

Thank you for purchasing our product. If there are any questions, please contact the authorized dealer. 

 

Before operating the unit, please read this manual thoroughly and retain it for future reference. 

 

Copyright 

Copyright 2015-2016 Bolin Technology all rights reserved. No part of this manual may be copied, reproduced, 
translated, or distributed in any form or by any means without prior consent in writing from our company. 

 

Trademark Acknowledgement 

 

 and other Bolin's trademarks and logos are the property of Bolin Technology Other trademarks, 

company names and product names contained in this manual are the property of their respective owners.  
 

IMPORTANT INFORMATION 

 

Legal Notice 

 

 

Attention:

 

To ensure  account security, please change the password after your first login. You are recommended to set a strong 
password (no less than eight characters). Password login does not apply to some models that do not need password login. 

 

 

 

The contents of this document are subject to change without prior notice. Updates will be added to the new version of this 
manual. We will readily improve or update the products or procedures described in the manual. 
Best effort has been made to verify the integrity and correctness of the contents in this document, but no statement, information, 
or recommendation in this manual shall constitute formal guarantee of any kind, expressed or implied. We shall not be held 
responsible for any technical or typographical errors in this manual. 
The product appearance shown in this manual is for reference only and may be different from the actual appearance of your 
device. 
This manual is a guide for multiple product models and so it is not intended for any specific product. 
In this manual, the illustrations of displayed interface, parameters displayed, drawings and value ranges may vary with 
models. Please see the actual product for details. 
Due to uncertainties such as physical environment, discrepancy may exist between the actual values and reference values 
provided in this manual. 
Use of this document and the subsequent results shall be entirely on the user’s own responsibility

 

Safety Information 

 

 WARNING!

 

Installation and removal of the unit and its accessories must be carried out by qualified personnel. You must read all of 
the Safety Instructions supplied with your equipment before installation and operation. 

 

 

 

Warnings: 

 

If the product does not work properly, please contact your dealer. Never attempt to disassemble the camera yourself. 
(We will not assume any responsibility for problems caused by unauthorized repair or maintenance.) 

 

This installation should be made by a qualified service person and should conform to all the local codes. 

 

When shipping, the camera should be packed in its original packaging. 

 

Make sure the power supply voltage is correct before using the camera. 

 

Do not drop the camera or subject it to physical shock. 

 

Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it 
gently. If the camera will not be used for an extended period of time, put on the lens cap to protect the sensor from dirt. 

 

Do not aim the camera lens at the strong light such as sun or incandescent lamp. The strong light can cause fatal 
damage to the camera. 

Summary of Contents for VCC-BR-M-11132017















Reviews: