26
PICTURE2
CHROMA:
You can set the brightness from OFF, LOW, MID,
HIGH
in each mode of the variable gamma mode.
HLC MODE:
HLC (Highlight Light Compensation) is a function to
adjust AE and AF, and to perform the masking of light
area as required when a high intensity spot light is
detected.
BACKLIGHT COM.
When the background of the subject is too bright, or when the subject is too dark due to shooting in the AE mode, back
light compensation will make the subject appear clearer.
STABILIZER (Available on 30X, not available on 20X)
When the image stabilizer function is set to ON, you can obtain the image with less screen blur caused by shaking. The
correction effect can be achieved at the vibration frequency around 10 Hz. The image stabilizer function uses the digital
zoom method. Although there are changes in the angle of view and resolution, the sensitivity is maintained.
Note: The image stabilizer function may not work under the environment of high frequency vibration components. When
using the camera under such environment, set the image stabilizer function to Off.
STABLE ZOOM: (Available on 30X, not available on 20X)
Stable Zoom is a function to perform correction using the image stabilizer function according to the zoom magnification
and zoom the image up to approx. 24× smoothly by combining the optical zoom with the digital zoom. By zooming the
image furthermore using the digital zoom, the image is zoomed up to 288×. On the wide side, the image without the
deterioration in resolution can be obtained because the digital zoom is not used. On the other hand, the correction effect
by the image stabilizer function is maximized on the tele
side, reducing the blur.
GAMMA:
In this mode, the gamma can be set to value from 0 to 1.
PAN TILT ZOOM Menu
The PAN TILT ZOOM menu is used to select the pan/tilt/
zoom mode.
DIGITAL ZOOM:
Set to DIGITAL ZOOM ON, 12X digital zoom is activated.
You can set digital zoom to ON or OFF. When set to OFF,
digital zoom does not operate, and only optical zoom is
available. When set to ON, digital zoom takes over after
optical zoom reaches MAX (20X/30X). Up to 200X/300X
can be zoomed digitally.
When digital zoom is available, the resolution decreases
ZOOM RATIO OSD (Zoom times display):
Set Ratio OSD to ON, the number of the zoom ratio that you are operating
displays on screen.
AF SEN:
NORMAL: Reaches the highest focus speed quickly. Use this when shooting a subject that moves frequently.
LOW: Improves the stability of the focus. When the lighting level is low, the AF function does not take effect, even
though the brightness varies,
contributing to a stable image.
MF SPEED:
Manual Focus variable speed, that has eight speed levels.
NEAR LIMIT:
Can be set in a range from OVER, 1cm, 11cm, 30cm, 80cm, 1.2m, 1.4m, 1.6m, 2.0m, 2.5m, 3.1m, 4.2m, 6m, 10m, 20m.
ADAPTIVE P/T:
Set to ON, Pan Tilt speed would be adaptive with the zoom range
.
Turn ON to automatically adjust the Pan and Tilt speed with various zoom ratios. For example, the higher
zoom ratio you use, the slower the speed of P/T.
P/T SPEED:
Set P/T Speed value to from 0 to 5 (The speed from low to high), to change the speed of P/T on remote controller.
EXPOSURE
WHITE BALANCE
>
PICTURE
>PAN TILT ZOOM
>
SYSTEM
OSD
DIGITAL ZOOM
OFF
ZOOM RATIO OSD
0FF
AF SEN LOW
MF SPEED 2
NEAR LIMIT 30cm
ADAPTIVE PT
ON
P/T SPEED
3
PRESET SPEED
5
PAN DIR
NORMAL
TILT DIR
NORMAL
PAN TILT ZOOM MENU
EXPOSURE
WHITE BALANCE
>
PICTURE1
>PICTURE2
PAN TILT ZOOM
>
SYSTEM
OSD
CHROMA OFF
HLC MODE OFF
BACKLIGHT COM. OFF
STABILIZER OFF
STABLE ZOOM OFF
GAMMA 0
PICTURE2
