Bolin Technology VCC-7 Series, User Manual

Page: 41 / 57

41
SLOW SHUTTER:
When set to
“On,” the slow shutter functions automatically when the
light darkens. This setting is available only when the AE mode is set to
“Full Auto.” The initial setting is “Auto Slow Shutter Off.”
S. SHUTTER LIMIT:
When the subject becomes dark, the shutter speed becomes slow and
the gain is increased. This is a function to put a limit on the shutter
speed. It prevents the camera shake when you shoot a moving subject
in a dark place.
Select the S. Shutter limit from the following: 1/50, 1/30, 1/20, 1/15,
1/10, 1/8, 1/6, 1/4, 1/3, 1/2, 2/3, 1/1.
MAX SHUTTER
Select the Max Shutter from the following:
1/25, 1/30, 1/50, 1/60, 1/100, 1/120, 1/150, 1/215, 1/300, 1/425, 1/600, 1/1000, 1/1250, 1/1750, 1/2500,
1/3500, 1/6000, 1/10K
MIN SHUTTER
Select the Min Shutter from the following:
1/25, 1/30, 1/50, 1/60, 1/100, 1/120, 1/150, 1/215, 1/300, 1/425, 1/600, 1/1000, 1/1250, 1/1750, 1/2500,
1/3500, 1/6000, 1/10K
SLOW AE
Adjust the Slow AE from 01 to 48
EX-COMP: (Exposure Compensation)
When MODE is set to one of FULL AUTO, SHUTTER PRI or IRIS PRI, set this item to ON to enable exposure
compensation. When you set EX-COMP to ON, LEVEL appear and you can select the exposure compensation
level from the following:
–10.5, –9, –7.5, –6, –4.5, –3, –1.5, 0, +1.5, +3, +4.5, +6, +7.5, +9, +10.5
If you set the level to 0, exposure compensation will be disabled. Level +10.5 is the brightest and
–10.5 is the
darkest compensation value.
When EX-COMP is set to OFF, exposure compensation does not function.
WHITE BALANCE Menu
The WHITE BALANCE menu is used to select the white balance mode.
MODE (white balance mode)
Select the white balance mode from the following:
AUTO: This mode computes the white balance
value output using color information from the entire
screen. It outputs the proper value using the color
temperature radiating from a black subject based on
a range of values from 2500K to 7500K. This mode
is the initial setting.
INDOOR: 3200K Base Mode
OUTDOOR: 5800K Base Mode
OPW (One Push White Balance):
The One Push White Balance
mode is a fixed white balance mode that may be automatically
readjusted only at the request of the user (One Push Trigger),
assuming that a white subject, in correct lighting conditions, and
occupying more than 1/2 of the image, is submitted to the camera.
EXPOSURE
>WHITE BALANCE
> PICTURE 1
PICTURE 2
GAMMA
PAN TILT ZOOM
> SYSTEM
OSD
WB MODE AUTO
>
WHITE BALANCE MENU
WB MODE INDOOR
WHITE BALANCE MENU
WB MODE OUTDOOR
WHITE BALANCE MENU
MODE GAIN PRI
GAIN 6dB
GAIN POINT OFF
HIGH SENSITIVITY OFF
EXPOSURE MENU: GAIN PRI