Bolin Technology SD500 Series, User Manual

Page: 23 / 62

23
1. Click Setup > Network > FTP .
2. Configure the IP address, port number of the FTP server, the
username and password of the upload account, enable
Upload
Images and Overwrite Storage , and then set the overwrite image
threshold.
3. Click Save .
E-Mail
After the configuration of E-mail, when alarms are triggered, you will be able to send messages to the specified E-
mail address.
1. Click Setup > Network > E-mail .
2. Configure relevant parameters of the sender and the recipient.
The following table describes some major parameters.
A. SSL
a.
When enabled, the e-mail will be sent through SSL
encryption.
B.
Attach Image
a. When enabled, the e-mail will contain 3 instant
snapshots as attachment according to the Capture
Interval.
3. Click Save .
Port Mapping
1. Click Setup > Network > Port Mapping .
2. Enable Port Mapping and select mapping type. If Manual is
selected, then external ports must be configured (external IP is
obtained automatically by the camera). If the configured port is
occupied, then the
Status will show Inactive.
3. Click Save .
DDNS
1. Click Setup > Network > DDNS .
2. Enable DDNS Service .
3. Click Save.
NOTE:

This function is not supported by some models, please see the
actual model for details.