Bolin Technology BC-7-4K20S-S6MNB User Manual Download Page 46

Page: 46 / 59

•

Call preset 1 to start the trace recording

•

Perform the pan/tilt/zoom operations you want to record, during recording, elapsed commands number
at the top of the screen increases in increments of 1 when the camera received one command.

NOTE:

If using the remote commander, pan/tilt/zoom operations can’t be performed simultaneously.

If using the joystick controller, pan/tilt/zoom operations can’t be performed simultaneously

•

Call preset 1 to finish and stop the trace recording

NOTE:

The recording automatically stops after the maximum recording time has elapsed.

Playing Trace Memory (pan/tilt/zoom operations)

•

Select the recorded trace number you want to play in TRACE NO.

•

Move the cursor to MEMORY, select PLAY and press HOME button to begin playback.

NOTE:

Playback stops if a pan/tilt/zoom operation is performed during playback by using the remote

commander or a joystick controller.

Deleting recorded Trace Memory (pan/tilt/zoom operations)

•

Select the trace number you want to delete in TRACE NO.

•

Move the cursor to MEMORY, select DELETE and press HOME button, it will d

isplay “DELETE

TRACE YES”, press HOME button again, this trace will be deleted.

SYSTEM MENU

PELCO ID

When using RS485 (PELCO P/D) control, Set
Camera ID to the address that you want to control
to.
This value is from 1-255.

IR-RECEIVE (Infrared Signal Reception)

When this is set to OFF, the camera does not
receive the signal from the infrared remote
controller.
Be sure to keep it set to ON when you use the
infrared remote controller.

Note

You cannot set IR-RECEIVE to OFF when you
operate the menu using the infrared remote
controller. To set it to OFF, use the appropriate
VISCA controller.

DISPLAY INFO

When this item is set to ON, the message of the camera configuration appears for about 10 seconds on the
screen, after the camera is powered on or rebooted.

PRESET MEMORY:

This feature allows you to save the image parameter to PRESET memory, turn it on to save most image
parameters like as picture, white balance, exposure, focus mode, zoom positions when you call the preset.

FACTORY RESET

You can select this item to set camera back to Factory Default setting by pressing HOME button to confirm the
action. All data of the camera that have been set will be deleted.

TALLY MODE

When the tally mode is set to ON, the tally light on the camera will be turned on.
If you connect the camera with Bolin keyboard controller, you can set the GPI I/O to Output mode in Keyboard
Setting, then you can do tally control via the keyboard directly.

TELE CONVERT MODE

You can shoot using 2x magnification.
OFF: Does not use the magnification function.
ON: Uses the magnification function. Gain 2X-80X zoom range with 1080p resolution.

NOTE

•

Available only when VIDEO FMT is set to 1080p resolution.

•

The angle of view when TELE CONVERT MODE is set to ON is narrower than when set to OFF.

  EXPOSURE
  WHITE BALANCE
  DETALL

PICTURE

  GAMMA
  NETWORK
  PAN TILT ZOOM

>SYSTEM

OSD

PELCO ID

IR-RECEIVE