14
Camera Initial setting status Information
Information of the camera initial setting status will display for 5 seconds.
1.
Camera PELCO ID for RS-485 control
2.
Camera ID for IR Remote Controller
3.
IR remote control signal receive current setting
4.
Baud Rate current setting
5.
Control COMM Port current setting
6.
Video format current setting
7.
HDMI current setting
8.
Model number
9.
Firmware version
Audio IN / OUT
Use the USB port to 3.5mm audio jack adaptor (VCC-UA35IO) to connect audio source.
Note
The USB port is only used for Audio physical input and output signal connection. The audio signal can be used for IP
video streaming, USB video streaming, HDMI/SDI?
•
A microphone can be connected to the
Audio IN
port, which feeds audio into the camera. (It does not support
power supply to microphone).
•
A speaker can be connected to the
Audio OUT
port, which will output any audio that is captured on the
Audio
In
port
•
See Manual part 2 for more information about Audio capture
PELCO ID
001
IR ID
01
IR-RECEIVE
ON
BAUD RATE
9600
COMM TYPE
422
FORMAT
1080P29.97
HDMI OUT
YUV
MODEL TYPE
----
SV:
V0B1100S36040AD04
Camera Status Info Display
