23
19. Motion
Go to “Main Menu” → “Parameter” → “Alarm” → “Motion” to enter into the interface shown as
picture 5-26
Picture 5-26
Picture 5-27
Area:
Click it to enter into the interface shown as Picture 5-27 to set the motion detection area
to be monitored intensively.
A single channel is divided into 15×12 (PAL) or 15×10 (NTSC) configurable grids. The red
grids indicate that the motion detection in the area is enabled, white semitransparent ones
indicates that the motion detection in the area is disabled. After setting is completed, right click the
mouse button to return and click Save to make the parameter setting effective.
Record Channel:
When object motion is detected, the record channel setting will be activated.
20. Alarm
Go to “Main Menu” → “Alarm” → “Alarm” to enter into the interface shown as Picture 5-28.
Picture 5-28
Channel:
Enable or disable Motion function.
Sensitivity:
Support 1-8 level, 8 is the
highest level.
Buzzer:
When detecting moving objects, a
buzzer makes alarms (disable, 10 seconds,
20 seconds, 40 seconds or 60 seconds).
Alarm Out:
Connect to the alarm switch of
the alarm apparatus.
Show
Message:
Messages
will
be
displayed on the screen when a moving
object is detected and alarms are made.
Send Email:
When a moving object is
detected, send Email to the specified Email
address.
Full Screen:
When a moving object is
detected, messages will be displayed in full
screen.
Latch Time:
When a moving object is
detected, the alarm time can be set as 10
seconds, 20 seconds, 40 seconds or 60
seconds.
Post Recording:
After the alarm finishes,
the duration time of the alarm recording can
be set as 30 seconds, 1 minute, 2 minutes
and 5 minutes.
This is the alarm management and setting of
the machine. User may set alarms under different
status in the interface. Please refer to Table 2-4.
Alarm In:
User may set four groups of alarm
input.
Alarm Type:
There are three kinds of status,
i.e. Always ON, Always OFF, and OFF.
Always ON: When the trigger is on, I/O alarm
appears; Always OFF: When the trigger is
off, I/O alarm appears; OFF: Do not receive
I/O alarm from trigger.
Buzzer Time:
You can set how long the
buzzer will sound when motion is detected
(off, 10s, 20s, 40s, 60s)
Alarm out:
Connect the external alarm switch.
