14
3. Live
Go to
“Main Menu” → “Parameter” → “Display” → “Live” to enter into the interface shown as
Picture 5-6.
Picture 5-6
Picture 5-7
4. Output
Go to “Main Menu”→ “Parameter”→ “Display”→ “Output” to enter into the interface shown as
Picture 5-8.
Picture 5-8
Video Output:
Live Output
Sequence Mode:
Set sequence mode
SEQ Time:
Sequence time is set 5 seconds
by default. User may set it as required
VGA/HDMI Resolution:
For VGA output or
HDMI output, the optional resolution include
1024
×
768, 1280
×
1024, 1440
×
900, 1280
×
720, 1920
×
1080
Transparency:
Adjust menu transparency
in the range of 0--128.
Support Overscan: Supports HDMI
overscan
Channel:
Select the channel in the
drop-down list.
Channel Name:
Channel name, support up
to 8 characters or 4 Chinese characters.
Show Name:
Showing Channel name
Record Time:
Enable or disable displaying
system time in recording.
OSD Position: Adjustment the position of
channel name and time display
Color:
Click
“Setup” to enter into the color
setting page (Picture 5-7)
Covert: Enable/Disable Video hiding
AHD EQ: Switch of AHD signal equalizer
Show Time:
Enable or disable the system
time display in the live interface.
Copy:
Copy the parameters in the channel
to any other channel or all channels.
Adjust the brightness, hue, contrast and
saturation of the image in selected channel in “Live”
interface.
Note
：
To modify the parameter value in sub-menu and
make it effective, click “
Save
” after modification and a
dialog box with message “parameters have been
successfully saved” will pop up. Click “OK” in the
interface and click “
Exit
” to exit the menu. If you want
to cancel the modification, click “Cancel” to exit.
