Bolide BN-NVR/32NX, User Manual

Page: 29 / 80

24

Record Channel
：
When object motion is detected, the record channel setting will be
activated.
4.2.1.4.2 Alarm
Go to “Main Menu” → “Alarm” → “Alarm” to enter into the interface.
It is the alarm management and setting of the machine. User may set alarms under
different status in the interface. Please refer to Table 2-4

Alarm In:
User may set four groups of alarm input.

Alarm Type:
There are three kinds of status, i.e. Always ON, Always OFF, and OFF.
Always ON: When the trigger is on, I/O alarm appears; Always OFF: When the trigger
is off, I/O alarm appears; OFF: Do not receive I/O alarm from trigger.

Buzzer Time:
You can set how long the buzzer will sound when motion is
detected(off, 10s, 20s, 40s, 60s)

Alarm out:
Connect the external alarm switch.

Show Message:
Display the alarm messages on the screen when motion alarm is
detected.

Send Email:
Set to send email to specified email when motion alarm is detected.

Full Screen Alarm:
When the motion is detected, the corresponding channel will be
switched to the full screen mode.

Latch time:
you can set how long the buzzer will sound when object move is
detected by external sensor(10s, 20s, 40s, 60s)

Post Recording:
You can set how long alarm record will last when alarm ends (30s,
1minutes, 2minutes, 5minutes).

Record Channel:
The record channel will be activated when the object move is
detected.

Copy:
Allow you copy current channel parameters to any other channel (setting of
record channel cannot be copied).