MENU
Figure 1
z
CAM
：
Select address of the intelligent Speed Dome .
z
MENU
：
Auxiliary control buttons.
z
AUTO
：
To control auto-horizontal rotation for pan/tilt.
z
CLEAR
：
To clear inputted data
z
0-9
：
Number key
z
WIDE
：
To a wide angle.
z
TELE
：
To turn to a telescopic range.
z
FAR
：
To make focus far manually.
z
NEAR
：
To make focus near manually.
z
OPEN
：
To open iris.
z
CLOSE
：
To close iris.
z
ON
：
Switch on the setting of function.
z
OFF
：
Switch off the setting of function.
z
CALL
：
To
c
all the preset position.
z
PRESET
：
To set the preset position.
z
SHOT
：
To call cruising track.
2.
Rear Panel (Figure 2)
A. Power input connector: input DC12V power.
B. DC12V Output.
C. Communication connector RS485:
D. ID-Code switch: Used to set the protocol in use and the baud rate of communications.
GND RS485
+
-
DC12V OUT
+
-
A
B
C
D
IV. Setting of the Keyboard
a)
The protocol in use and the baud rate of communication of the keyboard are set by the
4
