-27-
6. Privacy Masking
Main menu
•
Privacy Making
Privacy Masking
====================================
1.Mask Number
:001
2.Setup New Mask
3.Activate
:OFF
4.Show Next Mask
5.Delete Current Mask
6.Back
0.Exit
This function uses grey masks to shield where moni-
toring may intrude on privacy,such as a resident
’
s
window, a toilet,etc.
1.Mask Number:
It sets the privacy mask number,rang-
ing from 001 to 008.
To select the mask number:
1.Select
MASK NUMBER
from Main Menu.
2. Move the joystick up or down to set the number
ranging from 001 to 008,and then move it to the left
or right to save the setting.
2.Setup New Mask:
This enables you to determine
the position to be masked according to the following
steps.
Move to the object
Call Preset 1 to confirm
Call Preset 2 to cancel
1. Select
SETUP NEW MASK
from Main Menu.
2. Move the joystick to the left or right. The follow-
ing picture will display on the screen.
3. Move the joystick to move the mask to the
position to be masked,and then call PRESET 1 to
confirm,call PRESET 2 to cancel.The following
picture will display on the screen.
Set width-height
Call preset 1 to confirm
NOTE
:
•
User should select other place or delete other mask
position to set a new one, if the total of mask number
exceeds a maximum of eight.
•
User should set new mask position, if the setting
object is exceeded the limitation area. An alert mes-
sage appears on the screen.
3.Activate:
This sets whether each mask is flashing on
the screen or not.For example, if mask number 002 is
set to OFF, the mask will be cleared on the screen.
4.Show Next Mask:
It automatically shows the next
mask.If the next mask is not set, an alert mesage will
pop on the screen .
5.Delete Current Mask:
The current mask is deleted.
