-24-
End of record pattern...
Recording Pattern
Call preset 1 to confirm
02/100
Move to start point
Call preset 1 to confirm
Call preset 2 to cancel
To stop recording,press the 1 numerical button and
PRESET button.The following picture will display on
the screen.
Move the joystick to record the zoom operation.Mean-
while the following picture will display on the screen.
4.Run Only Once
: The current pattern is run only once.
5.Run Continuously
: The current pattern is run con-
tinuously .
6. Delete Current
: The current pattern is deleted.The
following picture is displayed on the screen.
Deleting.....
5.4 Autoscan Setup
Main menu
•
Function Setting
•
Autoscan setup
Autoscan Setup
====================================
1.Autoscan Number
:001
2.Title
:
3.Set Left Limit
4.Set Right Limit
5.Defaul Speed
:255
6.Run Continuously
7.Delete Current
8.Back
0.Exit
This function allows you to set the left and right edges
of the area to be monitored,and the camera can move
back and forth between these two points.
•
Up to four autoscan modes can be set.
•
The speed for autoscan can be set.
1.Autoscan Number
:It sets the autoscan mode number,
ranging from 001 to 004.
2.Title
: It sets the name for the autoscan mode,which
can be displayed on the screen.Please refer to page 11
in details.
Edit Autoscan Title
====================================
Input: [
]
Back
3.Set Left Limit:
This sets the left edge of the area to
be scanned.
Move to left limit
Call preset 1 to confirm
Call preset 2 to cancel
Move the joystick to desired position,and then choose
to save or cancel as the above picture indicated.
