84
1.4.6.13
The Mute indicator operation modes are described in Table 1.4.6.15.
Table 1.4.6.15 Buzzer status indicator
1.4.6.14
The Buzzer operation modes are described in Table 1.4.6.16.
The modes are specified from highest to the lowest priority – the Awake is the highest priority
mode, the Off is the lowest one.
Table
1.4.6.16 Buzzer Alarms
Buzzer condition
Indicator Operation Modes
(two-second cycle)
1
2
Muted
Yellow
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Muted or no sounds
Off
Status of panel/element (input, output, power,
tamper, buttons)
Buzzer Alarms
1
2
Powering the panel
Melodic signal (Wake up)
Entering the admin menu
Melodic signal (‘Administrator)
Entering the installer menu
Melodic signal (Installer)
indication test start
Melodic signal (Test)
Button press
(access to control);
presenting the Touch Memory key;
granting access
Short single
Button press
(no access to control);
denial of access
Long single
End of control timeout
(end of the control session);
Completion of indication test
Short triple
Fire Protection output state:
Control Program Activated;
Input state:
RELEASED
Long two-tone continuous
Input state:
FIRE2;
FIRE;
RCU ACTIVATED
Short two-tone continuous
Input state:
INTRUSION ALARM;
FLOOSING DETECTED
Short single tone intermittent
Input state:
LOBBY ALARM
Abrupt two-tone
Input state:
PREALARM
Short two-tone intermittent
