ADDRESSABLE LED EMERGENCY SIGN BOARD
S2000-OST
INSTRUCTION MANUAL
mod. 00 “FIRE”
mod. 04 “GAS KEEP OUT”
mod. 08 Arrow Right Sign
mod. 01 “EXIT”
mod. 05 “POWDER ESCAPE”
mod. 09 Man / Arrow Left Down
mod. 02 “AUTO OFF”
mod. 06 “POWDER KEEP OUT”
mod. 10 Man / Arrow Right Down
mod. 03 “GAS ESCAPE”
mod. 07 Arrow Left Sign
mod. 11 “ESCAPE EXIT”
1
TECHNICAL DATA
1.1
General
S2000-OST Addressable LED Emergency Sign Board (hereinafter referred to as the S2000-OST) is used to display alarm
messages of fire alarm systems, to identify escape routes and to display information.
The S2000-OST operates under a polling loop controller S2000-KDL (of version 2.15 and higher) or S2000-KDL-2I (of version
1.15 and higher) (hereinafter referred to as KDL) as part of an Orion integrated security system. The S2000-OST supports
DPLS_v2.00 Multiplex Addressable Polling Loop Protocol. A part of the lighting circuit with a power supply is galvanically isolated
from the control circuit of the polling loop. Electromagnetic compatibility of the S2000-OST meets the requirements of the third
immunity level accordingly to Russian standards. The version of S2000-OST firmware is v.1.00.
S2000-OST is available with one of the following signs: “EXIT”, “FIRE”, “AUTO OFF”, “GAS ESCAPE”, “GAS KEEP OUT”,
“POWDER ESCAPE”, “POWDER KEEP OUT”, Arrow Left Sign, Arrow Right Sign, Man / Arrow Left Down Sign, Man / Arrow
Right Down Sign, “ESCAPE EXIT” or any customizable lettering/pictogram.
1.2
Specifications
1)
Ingress Protection Rating
-
IP41
2)
Climatic Category (Russian Industry Standard
ОСТ
25 1099-83)
-
О
3
3)
Polling Loop Voltage
-
8 to 11 V
4)
Current Consumed from the Polling Loop
-
0.5 mA
5)
Lighting Circuit Power Voltage
-
12 to 24 V
6)
Current Consumed from Lighting Power Supply
–
12 V
-
25 mA max
–
24 V
-
13 mA max
7)
Galvanic Isolation between the PL and Lighting Circuit
-
Up to 4 kV
8)
Operating Temperatures
-
Minus 30°
С
to +55°
С
9)
Relative Humidity
-
Up to 93% at +40°
С
10)
Transportation and Storage Temperature
-
Minus 50°
С
to +55°
С
11)
Overall Dimensions
-
303.3 mm
×
112.5 mm
×
36 mm
12)
Weight
-
240 gram
13)
The content of precious materials: no need to account for the storage, disposal and recycling. (Clause 1.2 of
ГОСТ
2.608-78).
1.3
Standard Delivery
–
S2000-OST LED Sign Board
– 1 pc.;
–
Instruction Manual
– 1 pc.;
–
Woodscrew 3
×
25
– 2 pcs.;
–
Wall Plug (for 3x25 woodscrew)
– 2 pcs.;
–
Woodscrew 4
×
40
– 2 pcs.;
–
Wall Plug (for 4x40 woodscrew)
– 2 pcs.;
–
Packing
– 1 pc.
2
OPERATION DIRECTIVES
2.1
External Connection Diagram and Mounting
The figure shows the typical connection diagram for
the S2000-OST. The S2000-OST is designed to operate
within premises. The power supply for lighting circuit
must be battery backed.
The S2000-OST operates under a KDL and all
operation conditions (a control program, activation
time, activation delay) are defined in the KDL
configuration by means of UProg. To use the S2000-OST, the relevant addressable device type for the S2000-OST address must be
selected by means of UProg and, if necessary, the relevant links between inputs and outputs of the KDL must be defined. To get more
information about addressable device types and configuration parameters, please refer to user’s manuals for KDL, S2000M, and
Orion Pro software.
addressable
device
addressable
device
+PL
−
PL
+PL
−
PL
S2000-OST
XT1
XT2
1
2
3
4
1
2
3
4
0
+12/24V
+12/24V
0
to the power supply
S2000-KDL
+PL
−
PL
