8
9
MOUNT PEDALS
The pedals are marked with an L for left and an R for right.
The left pedal is left hand threaded (go counter clockwise to
tighten), and the right pedal is right-hand threaded (go clock-
wise to tighten).
• Use a generous amount of grease on the pedal threading
(this makes it a lot easier for you to remove the pedals in the
future).
• Tighten each pedal to its proper side with a 15mm wrench.
MOUNT SAFETY EQUIPMENT
• Mount bell on handlebar stem.
• Mount front reflector on handlebar.
• Mount back reflector on saddle stem.
• Mount the wheel reflectors between the front and back
wheel spokes.
PUMPING UP YOUR TIRES
• Remove plastic cap from valve.
• Open tip of presta valve.
• Attach your pump head. There are several different types of
pumps that requires a lever to be switched up or down, so
make sure you understand the pump you are using before
pumping up your tires.
• Pump tires to desired p.s.i. The correct/recommended p.s.i
depends on the tubes and tires you are using. And can usu-
ally be found on the sidewall of the tires.
• Tighten nut.