OPERATION MANUAL
RotoMax
9
3
INSTRUCTIONS FOR USE
Make sure the equipment is switched off and the power plug disconnected from
the electrical outlet before installing any tools (pipe cleaners, grinding tools,
etc.) to the end of the flexible shaft.
• Always round the end of the flexible shaft to avoid cuts and to facilitate
mounting of the tools onto the shaft.
• Check that the flexible shaft extends out of its jacket only to the length
required for tool mounting. Check that the retaining screws on the tool to
be mounted have been loosened enough to facilitate tool mounting. Push
the flexible shaft as deep into the tool as possible. Tighten all screws.
Check the user manual of the tool to be mounted for possible more
detailed installation instructions!
• Always check that the mounted tool’s direction of rotation is set as
required. The natural and common direction of rotation is clockwise
(forward), due to the direction of the braiding
of the flexible shaft. In case of clockwise rotation, the torque resistance of
the flexible shaft is optimal.
• Counter-clockwise (reverse) rotation is intended for temporary use only.
Counter-clockwise rotation may cause breaking of the shaft.
When the equipment is in use:
When operating the equipment, always use a special vacuum cleaner in the
machined pipe in order to remove potentially generated dust.
!
!
V
2, 20.1.2021
