BOHYUN BY-1200, User Manual

Page: 11 / 17

１０
INSTALLATION
Connecting pipes
There are two pipes from the hydraulic pump as shown in the figure. (X) is a
pneumatic pipe and used for the safety lock. (Y) is a hydraulic oil pipe and used
for the hydraulic cylinders.
Enter hydraulic oil
Remove the motor box off, and then turn the oil cap anti-clockwise to open the oil
inlet. Fill in the hydraulic oil 30# from the oil inlet as shown in the figure.
NOTE

Make sure that there is sufficient oil in the tank when the machine working

Do not overfill the oil tank, otherwise it may overflow when the oil warms up and
expands.

Make sure that the oil tank cap is properly closed before working.