11
9. The Battery
Charging:
•
Firstly, connect the battery to the charger and then connect the charger to your
power supply. The LED indicator will light up red to indicate that charging has
started. Once the LED indicator turns green, the charging is completed. After
charging you first remove the plug from the power supply and then you remove
the connection from the charger of the battery . Never do this in the reversed
order.
•
Always keep the battery and charger during charging in a fresh and stable
environment. The performance capacity of the battery varies between 0-45°C.
Never cover the battery and charger during charging. If the temperature is
during charging becomes too high, the LED indicator rood will blink. The charger
will now go a security mode. remove the charger from the environment and let it
cool down in a fresh and ventilated place. As soon as the charger reaches a
temperature of below 45°C you can resume charging.
Battery status indicator:
Turn on the power supply, at the bottom of the display appear six bars to
indicate the battery is completely charged. As soon as only two bars are visible,
you must charge the battery.
Attention:
•
Only use the charger indoors.
•
Never charge in a small space, direct sunlight or in an environment with a high
temperature.
•
You are not charging? Never leave the plug in the mains supply.
•
Stopper charging the battery if:
o
the battery or charger emit an unpleasant smell,
o
becomes overheated,
o
the LED indicator reacts strangely.
immediately stop charging and contact our service center.
•
Never remove any components of the charger and do not modify them.
•
Never charge faulty batteries and only use original batteries
•
Never use the charger in an environment with inflammable substances. This can
cause fire or explosions.
•
Keep the charger away from water and don't let it become wet. This can
cause a fire or you could get an electric shock.
•
Never touch any internal components with bare hands, you can get
an electric shock.
