Bohle Veribor BO 601, Operating Instructions Manual, Page: 16 / 80

16
04
Technical Data
Product Pump type Rubber pad
Carrying
capacity
Intended use
601 Pump tappet with coloured ring ø 214 mm 120 kg Flat surfaces
601G
Pump tappet with coloured ring ø 214 mm 120 kg Flat surfaces
601.45
Pump tappet with coloured ring ø 214 mm 110 kg Flat and textured surfaces
601.2
Pump tappet with coloured ring ø 220 mm 80 kg
Flat, strongly textured and
curved surfaces
601.1BL
Priming pump with pressure gauge ø 214 mm 120 kg Flat surfaces
601.8
Priming pump with pressure gauge 80 x 380 mm 80 kg Flat surfaces
The suction lifters are subject to a regular load test carried out by Bohle under the conditions described in
the operating instructions. The maximum load capacities achieved in this test are halved and indicated as
permissible load capacity (see Technical Data). The tool therefore has a safety factor of 2.
05
EC Declaration of Conformity
in compliance with Directive 2006/42/EC, annex II, part 1 A
Bohle AG
Dieselstr. 10
D - 42781 Haan
Authorised Representative for the Compilation of Technical Documentation:
Edgar Höhn, Bohle AG, Dieselstraße 10, D - 42781 Haan
We hereby declare that the delivered models of the “manual suction lifter“ products
Type 601.1BL, 601BL, 601, 601.45, 601.2, 601.8, 601G
comply with the relevant provisions:
¡
EC Machinery Directive (2006/42/EU, Annex I)
¡
Applicable harmonised standards, especially DIN EN 12100
Haan, 20/06/2017
Dr. Thorsten Böllinghaus, Chairman Bohle AG
Dieselstraße 10, D - 42781 Haan