9
exceeds 60 minutes, it will time out and not be saved. If the recording
is silent for 60 seconds, it will time out and not be saved.
Pages in a zone’s queue are played in the order that they are placed
in the queue. A live page started on a zone that is playing a recorded
page will cause the recorded page to be terminated and sent back to
the queue. The interrupted message will play again from the begin-
ning of the message when the zone becomes idle. Multi-Site Emer-
gency-All-Call, Multi-Site All-Call, Emergency All-Call, All-Call, Alarm,
Tone, and Emergency Announcement will also interrupt any queued
messages playing in any zones. All re-queued messages will play
again from the beginning of the message when the applicable zones
become idle.
Selecting
Disable Audio
will cause playback paging of all recorded
messages to stop. The messages will resume play from the beginning
when audio is re-enabled.
To record a page for page queuing:
Step 1
Select the soft key labeled
Directory
.
Step 2
Use the navigation keys to select
Paging
and then
press
OK
.
Step 3
Use the navigation keys to select
Record Page
and
then press
OK
.
Step 4
When prompted, enter the queue number for the
queue that you want to page and press #.
Step 5
Wait for the tone and then record your message.
Step 6
Hang up when finished.
Note:
When the DTMF Code #{Zone Number} is used to initiate a
zone page, Nyquist will start recording a queued page if the zone
belongs to a queue. If you want to start a real-time page to the
zone instead, dial #{Zone Number}*.
