Bogen NQ-A4060-G2, Installation And Use Manual, Page: 7 / 60

NQ‑A4060‑G2, NQ‑A4120‑G2, NQ‑A4300‑G2
Viewing and
Understanding LEDs
Two LEDs appear on the front of
the amplifier. One is labeled POWER
and appears as solid red during initial
power up, flashes green during a boot
sequence, and appears solid green
when fully booted.
The STATUS LED uses the following
indicators to provide information
about the appliance:
• FLASHING RED –
No network connection found.
• SOLID BLUE – The amplifier is
in an uninitialized state and is
not associated to a server.
(The server may be in a discovery
mode.)
• SOLID GREEN – The amplifier is registered to a Nyquist
server and is in normal operation.
• FLASHING GREEN – The amplifier has an IP address but
is not registered with the Nyquist server.
• SOLID RED – The amplifier needs to be rebooted or reset
so that the Nyquist application can resume.
• FLASHING BLUE – The amplifier is updating.