6
Installation
Package Contents
•
Digital Feedback Terminator Unit
•
Power Pack,
1
2V DC
•
Package of two
1
/
2
" mounting wood screws
•
Installation Manual
You can mount the Digital Feedback Terminator on a wall, rack or table.
Installation Steps
These are the general steps for installation:
1
. Mount the unit to the wall, rack or table.
2. Make cable connections from the DFT
1
20 to the PBX and the paging system.
3. Set DIP switches to the desired operation.
4. Power unit up.
5. Test unit operation.
Mounting the Unit
To mount the unit:
1
. Select a space on the wall, rack or table. Make sure there is a standard electrical outlet into which you can plug
your power pack.This outlet should not be controlled by a switch.
2. Mount the DFT
1
20 and its wiring at least
1
8 inches away from power supply or other equipment that generate
electrical noise. Secure using the supplied mounting screws.
3. Connect the power supply. Power LED should be green.
