M2(W) / M3(W) / M6W
15
WORKING HEIGHT – LATE APPLICATION
The spreader must be tilted when used for late application – dependant on
the distance between the crop top and the spreading discs:
A
The chart below indicates the correction to be made – in relation to the tilt
angle of the spreader for NORMALspreading, and according to the chart.
Spread width
A = 15 – 35 cm.
Tilt addition (
°
)
A = 35 – 55 cm.
Tilt addition (
°
)
15
-
-
12
42
metres
metres
+ 4
°
+ 3
°
+ 3
°
+ 2
°
Example:
Tilt angle during NORMALspreading (15-42 metres) according to spread chart
=
+2
°
Hight above crop (A)
=
45 cm
Tilt angle during LATE APPLICATION
=
( +2
°
+2
°
) = + 4
°
WORKING HEIGHT – CHASSIS KIT
See the manual of the chassis kit.
Options are not necessary for
late application in high crops.
•
The link pins of the spreader
are moved to the lowest
position in order to lift the
machine as much as possible.
This will minimize the risk of
damage to the crop.
A
Crop top
Link pins