[MBA_NKBD_EN] Rev.: 10/2015
29
No liability accepted for translation or printing errors. Subject to changes in dimensions, weights and other technical data.
All rights reserved. Modifications, reprints and photomechanical reproduction, even in extract from, require the express permission of BOGA GmbH, Werkstraße 16, D-59494 Soest.
BOGA GmbH
• Werkstraße 16 • D-59494 Soest • Fon: +49 2921 96943-0 • Fax: +49 2921 96943-29 • [email protected] • www.airwin.net
14. Commissioning
Before commissioning the NKBD, check once again that all installation and wiring work has been carried out
correctly and fully completed. In particular, the water and power supply connections must be in proper order
and comply with the relevant safety regulations.
a) Manual functions:
Release of permeat inlet into the
NKBD
fig. 36 - Stop cock
Release of 230 V / 50 Hz to the transformer and
switch on transformer
fig. 37 - Circuit breaker
The SET humidity at the continuous control or hygrostat
must be higher than the ACTUAL humidity
fig. 38
– Duct hygrostat
