Bofan PT510, User Manual, Page: 16 / 21

14
Note: the device password is 000000 as default
Get tracker firmware version
Command <password> VER
Remarks VER=Version
Get current location
Command <password> RCP
Remarks Get current location
’
s latitude and longitude of PT510
Get Google map link by SMS request
Command <password> RCM
Remarks This command is still valid even don
’
t configure PT510
’
s GPRS connecting
Change password
Command <password> PWD <new password>
Remarks PWD=Password (must be 6 digits)
Reset password when the previous password is forgotten
Command 000000 RPW <new password>
Remarks Please long press the SOS button when you send this command to PT510
(new password must be 6 digits)
Set preset phone number for SOS button
Command <password> SOS ,<SOSNumber1>,<SOSNumber2>,<SOSNumber3>
Remarks
l
SOS Number: Preset phone number to receive phone call or SMS from PT510. Max 16 digits.
Maximum 3 SOS numbers can be set.
l
If only set the 1st number, PT510 will send SMS and then call to this first number after
pressing SOS button.
l
If set the 2nd or 3rd numbers too, PT510 will send SMS to all 3 numbers, only call to the 1
st
number after press SOS button.
Note: <password>SOS, command is for cancel all pre set numbers.
Set Over Speed Alert
Command <password> SPD <Max Speed>
Remarks Max Speed (the preset speed value)
l
=0 to turn off this function
l
=[0,500](unit: Km/h)
Example: 000000SPD80 it will send alert when it is over 80Km/h
NOTE
When car speed is higher than the preset value, PT510 will send an alert SMS to the preset SOS
number.
Set Geo-fence Alert
Command <password> GOF <Type>,<SWLat>,<SWLng>,<NELat>,<NELng>
Remarks
l
Type =1, alert when out of range
l
Type=2, alert when enter this range
l
SW=South-West
l
NE=North-East
Example
：
000000GOF0 , to turn off this function
NOTE
When car leaves out or enters a preset scope, PT510 will send one Geo-fence SMS to the preset
SOS number.
Set Mileage Alert