13
u
Temperature sensor
: if you bought temperature sensor, it already be connected to AD2
u
Alcohol senso
r: if you bought alcohol sensor, it already be connected to AD2
5.3 Accessories operation
u
SOS
: sending SMS command
000000SOS,13112374567
to set phone number for receiving SOS
alarm by SMS and call. Once you press the SOS button (black button in plug-in wires), will get SOS
alarm on phone 13112374567.
u
Relay
: stop vehicle remotely
ü
Sending SMS command
000000OPC1,1
to tracker, vehicle will be stopped immediately.
ü
Sending SMS command
000000OPC1,1,1
to tracker, vehicle only be stopped after its speed lower
than 20km/h.
ü
Sending SMS command
000000OPC1,0
to tracker to restore the vehicle before you driving it.
ü
Click
“
Stop Engine
”
button in real-time in FMS, select tracker, select output1, choose
“
Yes
”
after
“
Safe Mode
”
, select
“
Stop Engine
”
after
“
Action, finally click
“
Submit to tracker
”
, when you want to
restore it, just select
“
Restore Engine
”
after
“
Action
”
, safe mode can be ignored when restore
engine.
Please don
’
t use this feature while car/vehicle with high-speed driving, and we suggest connect relay with
fuel control line in your car, Bofan is not liable for any traffic accidents.
u
Buzzer
:
ü
Sending SMS command
000000OPC2,1
to tracker to trigger buzzer for one time
ü
It also can be set to automatically triggered by other alarms
For example, Speed Alarm
è
Buzzer keep working for 10 seconds,
l
First you need to set Speed Alarm (both are ok by SMS or in FMS)
l
Second sending two SMS commands
000000AN1'#OPC2,1,',10,'#OPC2,0'
and
000000SALSPD10001
to tracker.
Note:
the fifth parameter in SALSPD is for the AN command number, AN1
è
1 at fifth parameter, AN2
è
2
at fifth parameter, parameter 1
st
to 4
th
details, please refer to command list.
u
Wired Door Sensor
: once two parts away from each other, it will send you key 3 alarm, you can
rename this key 3 alarm to
“
door open alarm
”
in system config in FMS.
u
About Fuel Sensor
,
Temperature Sensor
and
Alcohol Sensor
operation details, please refer to its
own separate user manual.
6. SMS Commands List