INITIAL SETUP
For a video tutorial, please visit
www.medisininstruksjoner.no
Remove the clear base
Insert the cartridge
Make a note of the cartridge
TURN
OPEN
PRESS
• Keep the cap closed
• Press the safety catch while pulling off
the clear base with your other hand
• Insert the cartridge into the inhaler
• Place the inhaler on a firm surface and
push down until it clicks into place
• Tick the checkbox on the inhaler label to keep
track of the number of cartridges
• Push the clear base back into place until you hear
a click
• Keep the cap closed
• Turn the clear base in the
direction indicated by the
arrows on the label until
you hear a click (half a
turn)
• Completely open the cap
• Point the inhaler down at the ground
• Press the dose-release button
• Close the cap
• Repeat steps 4–6 until a mist is visible
• Then repeat steps 4–6 three more times
• Your inhaler is now ready to use and contains 60
puffs (30 doses)
x3
Steps 4-6
1
2
3
4
5
6
“CLICK”
