9
STEP 3
Remove the clamp (25) and
a
llen bolt (22) from front post (4). Attach handlebar (5) to front post (4) and
tighten with clamp (25),
a
llen bolt (22), cover for clamp (37) and T-type knob (21).
Insert hand pulse wires (20) into the grommet (32) and pull out from top bracket. Attach hand pulse wires (20)
and upper computer wire (33) to the computer (6) accordingly.
Attach the computer
(6) to the bracket of the front post (4).
Tighten with 4 screws (27) which
are
pre-assembled on the back of computer (6).
32
20
5
21
22
25
37
4
6
33
STEP 4
Attach the cover (12) to sliding tube (13) and tighten with the screw (40) which is pre-assembled on the
sliding tube. Release the nuts under the seat (8), attach the seat to sliding tube (13) and tighten the nuts.
Insert seat post (7) into main frame (1) through seat post cover (17). Line up the holes and secure seat in
position with quick release knob (11). The correct height for seat can be adjusted after the bike is fully
assembled.
1
11
7
8
12
17
40
13
12
Summary of Contents for MAG BIKE ABK2.0
Page 3: ......
