19
C. When the function you have selected count backwards to ZERO or you have pressed the STOP
KEY, the computer will stop and display the average figure.
(2) RACE (Fig.5)
：
A. Enter into the RACE mode and L9 will flash, the TIME/500M will display 4:00. Then, you can
press UP or DOWN to set L1 ~ L15, press ENTER to confirm. Then, you can set the distance of
the race (500M~10000M) while the value of DISTANCE is blinking.
Press ENTER and the picture of the race will display clearly on the screen.
The value of the TIME/500M are as follows
：
L1 L2 L3 L4 L5 L6 L7 L8 L9 L10
L11 L12
L13
L14 L15
8:00 7:30 7:00 6:30 6:00 5:30
5:00
4:30
4:00
3:30
3:00
2:30 2:00 1:30
1:00
Fig.5 Fig.6
B. Press START KEY to start, and STOP will disappear. The USER & PC will display in the matrix
(Fig.6). The computer will stop when either user or computer has reached the race distance that
was set, then the matrix displays “PC WIN or USER WIN” (Fig.7).
Fig.7
C. When the race is over, you can press the START to have a race once again. Or press RESET to
leave the race screen.
(3) RECOVERY
：
1. This meter works a 5.3KHz chest strap heart rate monitor(not included). After exercising for a
period of time, keep wearing chest strap and press “RECOVERY” button. All function display will
stop except “TIME” starts counting down from 00:60 to 00:00.
2. Screen will display your heart rate recovery status with the F1,F2….to F6.
3. F1 is outstanding. F6 is poor.
User may keep exercising to improve the heart rate recovery status.
(Press the RECOVERY button again to return the main display.)
NOTE:
This meter uses 2 AA batteries, which are included.
Changing the batteries will reset all values.
If there is a problem with the display, try changing the batteries first.
When changing the batteries, change both of them. Do not mix battery types.
Do not mix old and new batteries. Dispose of old batteries according to your regional guidelines.
