- 11 -
III. Edit Mode
：
1.
：
Under Start/Ready position, press Mode to choose Manual and Program mode by press +/- key.
2. Program Mode
：
Press +/- key to edit the Program (P1~P8), and the PROGRAM window will flash, the
LCD window will show P1~P8 to edit, you can press +/- key to edit. Press ENTER to enter the TIME edit,
the Program pre-set value is 30min, Range is 20~99min, STEP is 1min.After edit, press ENTER or START to
start the machine. If you press START directly during edit, the rest un-edited functions are pre-set. During
edit, INCLINE and SPEED window will display first level value. The matrix window will display the
picture.
3. WARM UP and COOL DOWN function: During WARM UP or Program position, change speed or
inclination, the value will increase or decrease in the next level. COOL DOWN is not affected and STOP is
the only function which can be carried out.
4. PROGRAM has 30 levels in all. The three anterior are WARM UP, the three later are COOL DOWN. Each
is 3 minutes. The setting time except anterior and later which mean 6 minutes will be execute averagely by
surplus 24 levels.
5. 9 HOLES mode has not functions of WARM UP or COOL DOWN. When distance is equal to 3.5KM, the
motor will stop, the INCLINE is 0 and displays” End”
IV. Program Operation and Instruction
：
：
Manu Mode
1. When press START, it will begin to count down for 3 seconds, after that, the motor will start , the speed
will start at 1.0KPH. The matrix window goes contrarotate like along playground, every circle is 0.4KM
(0.25MIL).
2.
Speed STEP is 0.1, you can press SPEED UP/DOWN key to select
（
the speed UP/DOWN step is 0.1
）
,
or press speed instant key 1
、
2
、
4
、
6
、
8
、
10 to select .
3.
Incline STEP is 1, you can press INCLINE UP/DOWN key to select
（
incline UP/DOWN step is 1
）
, or
press incline instant key 2
、
4
、
6
、
8
、
10
、
12 to select.
4.
When TIME can set or can’t set:
(1) When TIME can set
，
the window will display the countdown value from target value. When time
reaches 0:00, the treadmill will stop automatically.
(2) When TIME can’t set
，
the window will display positive number. When time reaches 99:00 the
treadmill will stop automatically.
5.
Pressing Mode key can switch among SPEED, DISTANCE, CALORIES and can’t switch among
INCLINE, PULSE, WEIGHT. It will just display INCLINE. When there is PULSE signal, it will display
the PULSE value. When there is heartbeat value, the PULSE window will display the heartbeat value.
6.
Press Stop when the motor is working, the motor will stop and the incline motor will stop, the Time
window will display Stop; If you press START key again, the motor will start after 3-seconds countdown ,
the speed will be kept at the same before stop , and the incline will be increased to the set height before
stop .
7.
When it is at stop position, hold the Stop key for 3seconds, and it will go back to the Start/Ready position.
8.
It will go back to the Start/Ready position after 30 seconds in the End position (or press Stop key).
9. The time pre-set value is 0, range is 20~99. When the time is 20 minutes, press +- to increase or decrease.
Increase Step is 1 and decrease is back to 0 directly. The matrix window goes contrarotate like along
playground during workout.
