23
Place treadmill on a level surface. Make treadmill run at approximately 6-8 km/h, observe the running
belt and make sure there is no deviation
.
I
f the belt has drifted to the right, unplug the safety
lock and power switch, and turn the right adjusting
bolt 1/4 turn clockwise, then insert the power
switch and safety lock, make the treadmill run and,
observe the running belt deviation. Repeat above
steps until the running belt is placed in the middle.
See picture A
Once the treadmill belt is swerving to the left,
unplug the safety lock, turn off the power, then
with the left adjusting bolt clockwise rotation 1/4
turn, and turn on the safety lock and power to
make treadmill run, checking the deviation of the
treadmill belt. Repeat the above steps until the belt
is centered.
See picture B
The treadmill belt will gradually stretch after
above steps or after a period of time. Unplug the
safety lock, and turn off the power, with the two
adjusting bolt clockwise rotation 1/4 turn, and turn
on the safety lock and power to make the treadmill
run, then standing on the belt to confirm the
tightness. Repeat the above steps until the belt has
moderate tightness.
See picture C
BELT ADJUSTMENT
Summary of Contents for JTM3000
Page 2: ...CONTENTPAGE...
