![background image](http://html.mh-extra.com/html/bodyworx/j1530ca/j1530ca_owners-manual_2783603009.webp)
Step 1:
Take the machine from the
package, put on the level floor; put the
upright into the bottom frame like picture.
Attention: when insert the right upright post,
should connect the signal wires well
between upright post and bottom frame.
Step 2:
Use 10pcs screws(right and left
each 5pcs) M8X15 fix the upright post.
Attention: Fix the front screws well on the
upright, the fix the other side screws.
Step 3:
Use 6pcs (ourside upright right
and left 3pcs) ST3*10 fix the cover of
upright on the bottom frame.
ASSEMBLY INSTRUCTIONS
Step4
:
Take the computer from
package, connect well the signal wire
between computer and upright.
Step5:
Insert the back of computer’s U
clamp into the upright post, right and
left each 3 pcs M8*15 screws fix the
upright post and computer, like
pictures.
Step6:
Like the pictures, fix all of the
screws, finish the assemble.