4.
Recovery:
(1)
After pressing recovery key, recovery function will start, only pulse and time are able
to use, other functions disable to use and display off, sensor input is effective. TIME
display
“1 : 00"
0 : 00
, LCD begin to count down, heart beat signal will blink with heart beat.
Other parts display off.
(2)
LCD display as recovery mode & stop mode.
(3)
If no heart beat and when count down to
, it should keep going till recovery
action is over and LCD will display F6.
(4)
Press recovery key when value reach 0, recovery function will be over without
carrying out.
5.
AUTO SLEEP:
1.
Press MODE and UP at the same time, computer will be in auto sleep
2.
No other action, computer goes into auto sleep automatically. You can press
any key to restart.
KEY FUNCTIONS
MODE:
Function choice key.
UP:
Value increasing key.
DOWN:
Value decreasing key.
RESET:
Clean the value to 0
TOTAL RESET:
Clean all values to 0
RECOVERY:
It is used for recovery function.
NOTES
1.
Two batteries are used for this monitor computer. SUM3 SIZE AA (1.5V)
2.
Keep far away from rain and wet place.
Summary of Contents for AKASIA 250U
