background image

 

MAINTENANCE 

 

1.  Do not drop this monitor or subject it to strong impact. 
2.  Avoid high temperature and solarization. Do not immerse the monitor in water as this will 

result in damage to the monitor. 

3.  If this monitor is stored near freezing, allow it to acclimate to room temperature before 

use. 

4.  Do not attempt to disassemble this monitor. 
5.  If you do not use the monitor for a long time, please remove the batteries. 
6.  It is recommended the performance should be checked every 2 years or after repair. 

Please contact the service center. 

7.  If the monitor becomes dirty, please clear it with a soft dry cloth. Do not use any abrasive 

or volatile cleaners. 

8.  No component can be maintained by user in the monitor. The circuit diagrams, 

component part lists, descriptions, calibration instructions, or other information which will 
assist the user’s appropriately qualified technical personnel to repair those parts of 
equipment which are designated repairably can be supplied by us. 

9.  The monitor can maintain the safety and performance characteristics for a minimum of 

10,000 measurements or three years. 

 

EXPLANATION OF SYMBOLS 

 

  Symbol for” THE OPERATION GUIDE MUST BE READ” 

The sign background colour:    blue 

The sign graphical symbol:    white 

   

Symbol for “CAUTION”

 

      Symbol for “TYPE B APPLIED PARTS” 

    Symbol for “ENVIRONMENT PROTECTION – Waste electrical products should not be 

disposed of with household waste. Please recycle where facilities exist. Check with your local 
Authority or retailer for recycling advice”. 

   

Symbol for “COMPILES WITH MDD93/42/EEC REQUIREMENTS” 

     

Symbol for “Polarity of d.c. power connector” 

 

Manufactured by Andon Health Co Ltd 

No 3, Jingping Street YaAn Road 

Tianjin Nankai 300190 

China 

 

Please visit www.mybodytalk.com.au for more information and accessories supply. 

11 

Summary of Contents for KD-5962













Reviews: